SUPPORT 24/7
Contact us 24 hours a day, 7 days a week
Please note that the SU30 is designed specifically for aerobatics and 3D vectored flight, with light weight being key. It is not designed to be used as a full power, high speed race plane.
| Tailslide Exclusives | No |
|---|---|
| Included Hardware | Included hardware:
Also available: Full retract combo. Includes Pilot-RC electric retracts and electric brakes, specific for this model. Also available: Turbine Ready version. Includes all the above, plus x14 Pilot-RC servos, all pre-installed. Just add your own turbine of choice. |
| Required Hardware | Required hardware:Turbine size:
Servos: Total x14 (x3 standard size + x11 medium size) x3 standard size high torque x1 for airbrake (minimum 65kg) x11 medium size servo (size: 35x15x30mm) x2 for ailerons (minimum 20kg) x1 for steering (minimum 10kg) x2 for elevators (minimum 20kg) x2 for rudder (minimum 20kg) x4 for vector rudder/elevator (minimum 20kg) Also requires all the usual accessories such as transmitter, receiver, batteries, powerbox and possibly other small accessories. Pilot-Rc recommended hardware:
Pilot-Rc recommended ACCESSORIES:
|
270mm back from the leading edge of the wing at the fuselage
Measured with fuel bag, landing gear down.
Elster Jet recommend the use of the gyro systems by Powerbox-Systems. These offer two banks, each with individually programmable settings.
| FUNCTION | NORMAL FLYING | 3D FLYING |
| Aileron | Normal Gain 20% | Normal Gain 40% |
| Elevator | Normal Gain 15% | Normal Gain 45% |
| Vector Elevator | Off | Normal Gain 100% |
| Vector Rudder | Off | Normal Gain 100% |
Contact us 24 hours a day, 7 days a week
Simply return it within 30 days for an exchange.
We ensure secure payment with PEV