SUPPORT 24/7
Contact us 24 hours a day, 7 days a week
Pilot-RC SU-30 2.8m
As low as
$8,099.99
Elster Jet has long been famous as the King of 3D jet airshows, especially with his big Su-30 delivering awesome performance and a gorgeous show display. As we know, Pilot-RC has been collaborating with Elster Jet since 2020, and now we are beginning production of the legendary Su-30 in a convenient new size with uncompromised performance.
It is built 100% from full carbon fiber with honeycomb construction and painted in-mold.
We proudly announce the Pilot-RC SU-30 2.8m Elster Jet.
Availability:In stock
Only %1 left
SKU
P-SU-28
Flat Rate Shipping: $325.00
- German design, by Ralph and Enrico from Elster Jet
- New Quick Release wing and stabilizer
- Extremely lightweight full carbon and honeycomb construction especially designed for outstanding 3D performance
- Painted in the mold so super light
- Ultra light weight landing gear mounts,
- Specially designed easy access to turbine for speedy installation
- Field setup can be done in seconds, thanks to the quick releases on the wings without the need for any tools, and the single elevator bolt accessed from the side
- Removable wing and elevator for easy transport
Please note that the SU30 is designed specifically for aerobatics and 3D vectored flight, with light weight being key. It is not designed to be used as a full power, high speed race plane.
| Tailslide Exclusives | No |
|---|---|
| Included Hardware |
Also available: Full retract combo. Includes Pilot-RC electric retracts and electric brakes, specific for this model. Also available: Turbine Ready version. Includes all the above, plus x14 Pilot-RC servos, all pre-installed. Just add your own turbine of choice. |
| Required Hardware | Turbine size:
Servos: Total x14 (x3 standard size + x11 medium size) x3 standard size high torque x1 for airbrake (minimum 65kg) x11 medium size servo (size: 35x15x30mm) x2 for ailerons (minimum 20kg) x1 for steering (minimum 10kg) x2 for elevators (minimum 20kg) x2 for rudder (minimum 20kg) x4 for vector rudder/elevator (minimum 20kg) Also requires all the usual accessories such as transmitter, receiver, batteries, powerbox and possibly other small accessories. Pilot-Rc recommended hardware:
Pilot-Rc recommended ACCESSORIES:
|
Write Your Own Review
Specifications:
| Model: | SU-30 Elster Jet |
| Wingspan: | 75″(1,906mm) |
| Length: | 110″ (2,800mm) |
| Wing area: | – – |
| Weight: | 34.3lbs (15.6kg) with JetCat P130x2 turbine with smoke system |
CENTER OF GRAVITY:
270mm back from the leading edge of the wing at the fuselage
Measured with fuel bag, landing gear down.
VECTOR AND GYRO:
Elster Jet recommend the use of the gyro systems by Powerbox-Systems. These offer two banks, each with individually programmable settings.
| FUNCTION | NORMAL FLYING | 3D FLYING |
| Aileron | Normal Gain 20% | Normal Gain 40% |
| Elevator | Normal Gain 15% | Normal Gain 45% |
| Vector Elevator | Off | Normal Gain 100% |
| Vector Rudder | Off | Normal Gain 100% |
DELIVERY & RETURNS
Custom static block for product detail
30 DAYS RETURN
Simply return it within 30 days for an exchange.
100% PAYMENT SECURE
We ensure secure payment with PEV