My Cart 0

Mini Cart

Pilot RC Pitts S2B 87"

Be the first to review this product
$1,949.00
- +
Add to Compare
Availability:In stock
Only %1 left
SKU
P-PITT-87
Flat Rate Shipping: $300.00
  • NEW! Pilot-RC’s first ever biplane! Years of experience poured into a new design
  • SPECIAL NEW! Pilot-RC new and patented quick release system for fast wing mounting at the field
  • Special Pilot-RC no screw canopy. Quick release with new security latch design
  • Strong but light, specially developed for precision acrobatic and extreme 3D flying
  • Genuine German Oracover (Ultracote) covering
  • Highly prefabricated, experienced builders can have air ready in under a day
  • Pre-installed hinges (glued and pinned)
  • Internally mounted cowling – so no external screws exposed
  • Removable wings , wing stut and stabs
  • Laser engraved motor mounting position

Pilot-RC’s first ever biplane! And it could be no other than the classically beautiful Pitts Challenger.

Fear not about long setup times of traditional biplanes, Pilot-RC’s innovative and patented systems allow you to have the model completely put together in under 5 minutes, to then unleash the acrobatic and 3D monster that our Pitts.

More Information
Tailslide Exclusives No
Included Hardware
  • Complete air frame with all basic accessories (such as carbon fiber main undercarriage, tail-gear assembly and wing-tubes as well as fibreglass control horns and wheel pants)
  • Pre-installed hinges and pre-mounted canopy
  • Fuel tank and fuel tubing pre-prepared, fuel dot and breather valve
  • Wheels, axels and wheel pants
  • Pre-prepared pushrods with ball links
  • Matching carbon spinner, 4.5″
Required Hardware
  • Motor: 100-120cc
  • Servos: 7-8 high torque plus throttle // Uses x1 per aileron (total x4), x1 per elevator and x1 or x2 on rudder

Required extension wire lengths:

- x2 for bottom wing aileron servo: 60cm
- x2 for top wing aileron servo: 87cm (installed in bottom wing) + 52cm (installed in wing struts) 
- x2 for elevator servo: 95cm 
- x1 for throttle servo

 

Also requires all the usual accessories such as transmitter, receiver, batteries, powerbox and possibly other small accessories.
Write Your Own Review
You're reviewing:Pilot RC Pitts S2B 87"

Model:    Pitts Challenger
Wingspan:    87″ (2,200mm)
Length:    84″ (2,120mm)
Wing area:    2,265 “² (1,465 cm²)
Weight:    29.4lbs (13.4kg)

Build information

COWL SIZE:

A: 298mm – B: 315mm – C: 326mm – D: 313mm

EXHAUST TUNNEL SIZE:

A: 348mm – B: 115mm – C: 387 – D: 131mm – E: 172mm

Extension wire lengths:

Throttle:
40cm

Upper wing:
No extension required

Wing strut:
(x2) 52cm

Lower wing:
(x2) For wing servo: 60cm
(x2) To wing strut: 87cm

Elevator:
(x2) 95cm

Rudder:
For Pull-Pull 10cm

CENTER OF GRAVITY:

225mm
Measured back from leading edge of the top wing at the fuselage.

You will find a laser engraved C.G. emblem on the inside of the fuselage, located close to the wing tube, which also shows the exact location for Center of Gravity.

DELIVERY & RETURNS

Custom static block for product detail
 
SUPPORT 24/7

Contact us 24 hours a day, 7 days a week

 
30 DAYS RETURN

Simply return it within 30 days for an exchange.

 
100% PAYMENT SECURE

We ensure secure payment with PEV