Pilot RC F86F 2.2m

- +
Availability:In stock
Only %1 left
SKU
P-F86F-2
Flat Rate Shipping: $275.00

Features

  • Full scale detail with rivets panel lines, simulated hatches, etc
  • Full composite construction, lightweight and strong
  • Two piece wing and two piece full flying stabiliser, all for easy transport
  • Quick release wings, no tools required
  • Quick release elevator system, clamp in place with a couple of turns to the bolt
  • Painted outside the mold so no seam lines
  • Fully hidden linkages for flap, rudder and ailerons; with no horn, servo arm, ball links or pushrods exposed

Proud to present Pilot-RC’s first true scale plane. We wanted a model that was iconic, flies amazingly well, and had not been overly done already.

Following the success of our F86D, we are pleased to satisfy our F86F fans as well!

More Information
Tailslide Exclusives No
Included Hardware
  • Complete air frame (including aluminium wing-tubes and fibreglass control horns)
  • Servo extension leads
  • Dual wall tail pipe (for 120-180N turbines)
  • Fiberglass fuel tanks (2100ml x2) and UAT (250ml)
  • Pre-prepared pushrods with ball links
  • Pre-glued control horns
  • Comes with air intake and turbine port covers
Required Hardware
  • Turbine: 120-180N 
  • Servos: (x11 + 2 optional)

x5 super high torque (minimum 40kg) // Uses x1 per elevator, x1 per flap, x1 on rudder

x2 super high torque (minimum 25kg) // Uses x1 per aileron

x4 middle size servo, 35 x 15 x 30mm // Uses x3 for gear doors and x1 for steering

+2 super high torque (minimum 40kg) if installing Speed Brake

Also requires all the usual accessories such as transmitter, receiver, batteries, powerbox and possibly other small accessories.

Write Your Own Review
You're reviewing:Pilot RC F86F 2.2m

Model:    F86F
Wingspan:    77″ (1,957mm)
Length:    82.3″ (2,090mm)
Wing area:     1,304″2 (8,414cm2)
Weight:    31.5lbs (14.3kg) without speed brake, drop tank or cockpit

BASIC SETUP:

Control throws:

Aileron: 17mm – Rudder: 35mm

Elevator: 37mm up / 25mm down
Measured from the front of the leading edge on the root of the elevator.

Elevator center position is 12mm down from the top of the fuselage

Take-off Flap: 30mm
Landing Flap: 55mm

Speed brake 1: 100mm
Speed brake 2: 190mm
Measured from the back of the speed brake plate. 

The CG is 305mm from the front leading edge on the root of the wing

DELIVERY & RETURNS

Custom static block for product detail
 
SUPPORT 24/7

Contact us 24 hours a day, 7 days a week

 
30 DAYS RETURN

Simply return it within 30 days for an exchange.

 
100% PAYMENT SECURE

We ensure secure payment with PEV