SUPPORT 24/7
Contact us 24 hours a day, 7 days a week
Pilot RC BAE Hawk
As low as
$1,699.00
Availability:In stock
Only %1 left
SKU
P-HAWK-18
Flat Rate Shipping: $200.00
Features
- Full composite construction, lightweight and strong
- Two piece wing and two piece full flying stabiliser, both fully removable
- Painted outside the mold so no seam lines
Everyone has a soft spot for the BAE Hawk, and this feeling will only develop further once you feel the gentle and smooth yet agile capabilities of our Pilot-RC version.
| Tailslide Exclusives | No |
|---|---|
| Included Hardware |
|
| Required Hardware |
x1 standard size high torque (important: minimum 28kg) x5 medium size servo (size: 35x15x30mm) x2 medium size servo (size: 35x15x30mm, minimum 10kg) Also requires all the usual accessories such as transmitter, receiver, batteries, powerbox and possibly other small accessories. |
Write Your Own Review
Model: BAE Hawk
Wingspan: 60.2″ (1,530mm) – without pitot tube
Length: 70.9″ (1,800mm)
Weight: 17.8lbs (8.05kg)
BASIC SETUP:
Control throws:
Aileron: 12mm up / 12mm down – 40% Expo
Measured from the wingtip
Rudder: 38mm left / 38mm right – 50% Expo
Elevator: 20mm up / 20mm down – 45% Expo
Measured from the trailing edge of the elevator at the fuselage.
Elevator center:
Set the trailing edge of the elevator, 17mm below the top of the fuselage. See photo:
Take-off flap: 20mm
Landing flap: 41mm
Measured from the root of the wing (fuselage)
The CG is 125mm from the front leading edge on the root of the wing
MANUAL:
Coming soon
DELIVERY & RETURNS
Custom static block for product detail
30 DAYS RETURN
Simply return it within 30 days for an exchange.
100% PAYMENT SECURE
We ensure secure payment with PEV