SUPPORT 24/7
Contact us 24 hours a day, 7 days a week
Pilot RC Laser 103" V3
$1,609.99
Availability:In stock
Only %1 left
SKU
P-LASE-103-V3
Flat Rate Shipping: $250.00
- NEW! Full Carbon reinforced fuselage and wing using carbon laminated wood.
- Genuine German Oracover (Ultracote) covering
- Highly prefabricated, experienced builders can have air ready in under a day
- Pre-installed hinges (glued and pinned)
- Internally mounted cowling – so no external screws exposed
- Includes cooling baffles
- Easy canister installation due to open construction
- Removable rudder (as well as removable wings and stabs)
- Laser engraved motor mounting position
- Push-Pull system for Rudder servos
New in 2023 we are proud to present the NEW LASER V3” 103” Pilot-RC has broken all the molds with this one.
The Laser has been fully designed from the ground up for out and out performance, keeping in line with current demand for faster, more aggressive and more agile models, while still keeping the well known great flying characteristics Pilot-RC models are known for.
You really need to see the videos of this model in action to understand its capability. In this case, its not a question of if the plane is quick enough, its whether you can keep up!
Here at Pilot-RC we always working on developing new ideas and improving our product line. We have listened to feedback from both the most technical pilots to those just beginning their journey as an RC pilot. We have balanced performane and design in our new Laser 103. No stone has been left unturned on this one. From the improved aerodynamic shape to the updated canopy you will notice we've upgraded everything. The updated wing design allows you to roll more smoothly with increased precision while remaining agile and light. Finally, take note of the quick release wing, canopy and improved stabilizer, giving you the convenience and reliability you asked for.
| Tailslide Exclusives | No |
|---|---|
| Included Hardware |
|
| Required Hardware |
|
| Crash Kits Available for this model |
Please note that additional or alternative spare wood outside of the above Packs is not available to order. |
Write Your Own Review
What's the difference between this Laser and the V2?
1. New wing design and improved Aileron for more precise flying and less drag in tip wing
2. Updated Fueslage alignment and Canopy for more smooth aerodynamic
3. Additional Carbon plate on quick release Canopy for and updated look and we've fixed the loss covering problem
4. Updated two-piece, hidden landing gear which provides a more modern appearance and we have addressed the loss covering present in earlier models
5. New quick release stabilizer system
6. New cowl details and updated 5"" spinner
7. Improved stronger, lighter structure
8. Updated cowl now pasted on the firewall
9. Added Carbon plate for cooling Canister in the bottom of fuselage
This LASER V3 design is not based from the scale Laser 200
The only component based from the Laser 230 is the cowl, the whole design is based from our pilot Laser V2.
We edited the curve of canopy for less drag and we've designed this rc plane for high performance 3D characteristic.
- Model: Laser – 35%
- Wingspan: 102.5″ (2.603mm)
- Length: 93.7″ (2.380mm)
- Wing area: 1,771 “² (11,430 cm²)
- Weight: 26.35lbs (11.95kg)"
Build information
COWL SIZE:
A: 335mm – B: 330mm – C: 307mm – D: 348mm
EXHAUST TUNNEL SIZE:
A: 603mm – B: 103mm – C: Unlimited – D: 131mm – E: 172mm – F: 192mm
Due to the open tunnel design in the Laser, there is no backplate (measurement C) so there is no limit to the length of exhaust that can be used.
RUDDER HORNS AND PULL PULL LOCATION:
A: 31mm – B: 55mm – C: 60mm – D: n/a – E: 8.5mm
Extension wire lengths:
Throttle:
40cm
Each aileron:
25cm + 75cm
(nearest servo and furthest servo – to reach receiver direct)
Each elevator:
150cm
Rudder:
140cm
(when using direct – if installing pull pull, no required extension)
CENTER OF GRAVITY:
194mm
Measured back from leading edge of the wing at the fuselage.
You will find a laser engraved C.G. emblem on the inside of the fuselage, located close to the wing tube, which also shows the exact location for Center of Gravity.
DELIVERY & RETURNS
Custom static block for product detail
30 DAYS RETURN
Simply return it within 30 days for an exchange.
100% PAYMENT SECURE
We ensure secure payment with PEV